eFlexFuel eFlexMoto Plus Guide D'installation page 7

Wiring harness parts:
•
Row connector (Figure A, 1)
•
Ground wire (Figure A, 2)
•
Temperature sensor (Figure A, 3)
•
Ethanol sensor connector (Figure A, 4)
•
Fuel injector connector (female) (Figure A, 5)
•
Terminal couple for male connectors (Figure
A, 6)
•
Male connector (Figure A, 7)
•
Extension connectors (5-8-cylinders) (Figure
A, 8)
•
Extension wiring harness (5-8-cylinders)
(Figure A, 9)
2.3.1 Disconnect the fuel injector connectors
•
Fuel rail (Figure B, 2)
•
The fuel supply line (incoming pressure line)
(Figure B, 1)
•
The fuel return line (Figure B, 3)
•
Fuel injector (Figure B, 4)
•
Vehicle's existing injector connectors (Figure
B, 5)
Disconnect existing connectors connected to the fuel
injectors.
https://eflexfuel.com/