EN
SAFETY INSTRUCTIONS
•
The product is only intended for outdoor use.
•
Switch off the power supply before installation.
•
Before cleaning, maintenance and/or other work on the
product, switch off the power supply by removing the fuse or
pulling out the plug.
•
Products with transformers must only be used with the
original transformer.
•
Do not allow children to play with the packaging material or
the product.
•
These instructions should be enclosed with the product if it is
sold or passed on.
•
Do not connect the lamp to the mains while it is still in the
pack.
•
Stop using the product immediately if it gets damaged,
especially the power cord, plug and/or lamp socket, and if it
is not working properly.
•
Repairs must be carried out by an authorised electrician.
•
Never attempt to modify or repair the product. Repairs that
are not carried out correctly can result in a risk of serious
personal injury and/or death.
•
The product's earth wire (green/yellow) is connected to earth.
•
Be careful not to damage the insulation on the wires during
installation. Make sure that the wires do not come into
contact with sharp edges. Damaged insulation can result in
a risk of electric shock.
•
Check that the mains voltage corresponds to the rated
voltage on the type plate.
•
The plug, power cord, wires and connections must not be
subjected to mechanical stress.
16