König SAS-MON51 Mode D'emploi page 5

• "Time switched"
Increase or decrease the time interval for automatic mode with the + or
– button.
4. Set the Auto/Manual switch (10) to "AUTO" to switch between the selected
cameras automatically.
When pressing the AV button, manual switching mode shows all
camera images, including cameras set to "o".
5. Press the 4:3 button (4) to change the aspect ratio.
6. Press the Mute button (2) to switch the sound off or on.
For this feature to work, the microphone on the camera needs to
be switched on.
Troubleshooting
Carry out the following checks if the monitor is not working properly:
• Make sure that the monitor is set to the correct AV channel (AV1-4).
• Make sure that all of the plugs are correctly fitted into the jack connectors.
• Make sure that the monitor is not damaged.
• Make sure that the power adapter is not damaged.
• Make sure, when automatic switching mode is on, that the cameras in the
AV switched set are not set to "o".
• Make sure that the display settings are all set properly.
5
ENGLISH