Safety Precautions; Installation Instructions - König SAS-MON51 Mode D'emploi

Operating temperature:
Weight:
Dimensions:

Safety precautions

• Do not open the monitor in the event of a malfunction. This product should
only be opened by a qualified engineer.
• Do not expose the monitor to water.
• Do not expose the monitor to high temperatures or humidity.
• Do not install the monitor close to strong magnetic fields, such as a TV or
speaker. This may affect the monitor's quality.

Installation instructions

1. Monitor
2. AV output jack connector
3. AV input jack connector
1. Place the monitor on its support (5) on a stable surface.
The monitor can also be mounted on an adjustable support (order
separately with art. nr. SAS-BRACK40) which can be mounted at the bottom
of the monitor and fitted with 3 screws on a horizontal or vertical surface.
2. Insert the DC plug into the DC 12 V input jack connector (4).
3. Insert the AC/DC adapter into the wall socket.
4. Connect the camera with the AV input cable to one of the AV input jack
connectors (3) on the rear of the monitor (max. 4 cameras).
-10 °C to +50 °C
450 g
180 x 155 x 25 mm
4. DC 12 V input jack connector
5. Support
6. Fitting point for adjustable support
3
ENGLISH