Manual - König SAS-MON51 Mode D'emploi

For information about installing and using the camera, refer to the
camera's installation manual.
5. You can connect an extra monitor to the AV output connector (2).
User instructions
1. LCD monitor
2. Mute button
3. AV button
4. 4:3 button
5. IR control sensor
1. Press the Power button (9) to switch on the monitor.
2. Press the AV button (3) to set the correct camera connection.
3. Press the Menu button (7) to navigate to the sub-menus.
The following sub-menus are displayed:
• Display settings: "Bright", "Contrast", "Colour" or "Hue". Adjust the
display settings with the + (8) or – (6) button.
• "AV switched set"
Select the cameras, which will be shown subsequently in automatic
mode. Press the + or – button to switch between cameras and the
Menu button to select or deselect a camera.
"√" indicates that this camera has been selected.
"o" indicates that this camera has not been selected.
6. − button
7. Menu button
8. + button
9. Power button
10. Auto/Manual switch
4
ENGLISH