Publicité
Les langues disponibles
Les langues disponibles
Use without continuous water drainage.
As soon as the water tank is full, the corresponding indicator light flashes (compressor,
fan, etc. stop operation). The unit beeps 10 times to remind the user that the water
needs to be drained.
Place both hands on each side of the
rear cover. Carefully pull the water
tank out of the unit and open the
water tank cover on the right side of
the water tank. Pour the water
through the gap between the water
tank and the water tank cover.
Note: Empty the water tank when it is full. Before re-inserting the water tank into
the unit, make sure that the float is movable or not.
Close the water tank cover and
turn the water tank handle
downwards. Replace the water
tank in the appliance and restart
the dehumidifier.
EN
43
Publicité
