Publicité
Les langues disponibles
Les langues disponibles
EN
Clean function in the air dehumidifier
Press the
entire process takes approximately one hour:
1.
The dehumidifier runs at high speed and releases air for more than 30 minutes.
2.
The dehumidifier changes to low speed and continues running for about 20 minutes.
Interrupt the Clean function:
1.
If you press the
function is aborted and the unit resumes its original operating status.
2.
Press the On/Off button (7) to cancel the clean function and place the
appliance in standby mode.
Pump Function
If you press and hold the humidity button (5) for more than 3 seconds, the
pumping function is activated/deactivated. (Connect a drain hose before activating
the pumping function.)
48
button (2) to activate the clean function of the dehumidifier. The
button (2) again during the cleaning function, the cleaning
Publicité
