Télécharger Imprimer la page

Magnavox MCR220BK Mode D'emploi page 8

Masquer les pouces Voir aussi pour MCR220BK:

Publicité

SETTING TIMES
SETTING THE CLOCK AND ALARM TIMES
The time is displayed using the 12 hour clock (PM
indicator lights up = PM, off = AM).
1. Press and hold down
TIME/ ALARM until the
clock or alarm time display
flashes, then release
TIME/ ALARM.
• Press TIME/ ALARM repeatedly to toggle
between the time or alarm displays
2. Press and hold down ∞ / § to fast adjust both
the hours and minutes settings.
3. Release ∞ / § when you
have reached the desired
setting.
y
If you need to adjust
the time slowly, minute by minute, press and
release ∞ / § repeatedly.
y
After several seconds, the time setting is
confirmed when the display stops flashing.
4. Repeat steps 1-3 for each of the clock or alarm
(AL1, AL2) settings.
Alarm time display
If you have set both alarms, the standby alarm time
display will show the earlier of the two alarm times
as priority.
E.g. if AL1 = 6:00 and AL2 = 5:45, then the standby
alarm display will show the AL2 time 5:45.
CD
CD PLAYBACK
1. Insert a CD with the printed side facing up, and
close the door.
2. Press PLAY/ PAUSE 2; to start playback.
y
Display shows:
'Cd: --' and the total
number of tracks, then
your current track
number, before
returning to clock time.
Other possible CD indications before
returning to clock time:
y door is shown if the CD door is not closed.
y noCd is shown if no CD has been inserted /
inserted incorrectly.
y nFCd is shown if the CD-R(W) is non-
finalized
y Err indicates a general error in operation of
the set.
3. Adjust the sound with 4 or 3.
4. To interrupt, press 2;
y CD icon
flashes.
5. Press 2; again to resume playback.
6. Press ALARM RESET to stop playback.
Note: If CD playback is paused for more than 15
minutes and no controls are pressed, the set
automatically goes to standby mode.
Selecting a different track during playback
The track number appears briefly in the display when
you press ∞ or § to skip tracks.
• Press § once or more to skip to the next track(s).
• Press ∞ once and playback will return to the
beginning of the current track.
• Press ∞ more than once to skip to previous tracks.

Publicité

loading