Télécharger Imprimer la page

Magnavox MCR220BK Mode D'emploi page 10

Masquer les pouces Voir aussi pour MCR220BK:

Publicité

SWITCHING OFF ALARM
Gentle Wake Volume
A sure way of getting up in the mornings, the gentle
wake volume for the alarm begins from a fixed gentle
volume (10) and gradually increases to a maximum
higher setting of ( 25.)
• The default low volume is Lo : 10, and the
maximum volume is HI : 25.
• During the alarm call, if you press 4 or 3, the
volume stops increasing immediately.
• The gentle wake volume settings do not affect
normal CD and radio playback volume level, unless
you have pressed 4 or 3 during the alarm call.
SWITCHING OFF THE ALARM
There are three ways to switch off the alarm. Unless
you cancel the alarm completely, the 24 HOUR
ALARM RESET will be automatically selected after
59 minutes, from the time your alarm time first goes
off.
24 HOUR ALARM RESET
If you want the alarm mode to be stopped
immediately but also wish to retain the same alarm
setting for the following day:
• Press ALARM RESET.
y You will hear a beep tone to confirm the 24
hour alarm is reset.
REPEAT ALARM
This will repeat your alarm call at 9-minute intervals.
• During the alarm call, press REPEAT ALARM/
BRIGHTNESS CONTROL.
• Repeat if desired up to an hour.
Note:
• The selected alarm mode
indicators flashes throughout the repeat alarm
duration.
• If you are using the CD alarm mode, CD playback
resumes at the point where the repeat alarm
interrupted.
• During the CD alarm, CD playback continues for up
to an hour unless you cancel / reset the alarm.
or
,
SLEEP
CANCELING THE ALARM COMPLETELY
To cancel the set alarm time before it goes off, or
during the alarm call:
• Press AL1 or AL 2 once or more until the selected
alarm indicator disappears from the display.
y You will hear a beep tone to confirm the alarm
has been cancelled.
SLEEP
About Sleep
The CD clock radio has a built-in sleep timer which
enables the set to be automatically switched off
during radio or CD playback after a set period of time.
There are 3 sleep times: 60, 30 and 15 minutes.
The sleep function does not change the operation of
your alarm settings.
Setting SLEEP
1. Press 2; (CD) or RADIO ON (radio) to switch on
the desired mode.
• You can also press SLEEP if you want the timer in
radio mode.
2. Select your timer option by
pressing
SLEEP once or
more until the desired
option is shown.
• Display shows SL: and the timer options:
60
30
15 minutes
3. To cancel the timer function you can either:
• Press ALARM RESET.
• Press REPEAT ALARM/ BRIGHTNESS CONTROL.
• Press SLEEP once or more until the sleep function
is no longer shown.
60
30...
C

Publicité

loading