Failure And Solution - CONTINENTAL EDISON CEVCSFBF Guide D'utilisation

If you have a problem with your device or think that the device is not working
properly, you can perform a few simple checks before calling a technician.
Failure
No power
Loss of aspiration
The motorized brush
does not turn
The battery
indicator lights red
while in use
For any other problem occurring on your device: contact the After-Sales
Service.
CAUTION: The power brush contains electrical connections, do not
immerse in water for cleaning.
VIII. FAILURE AND SOLUTION
Before using the appliance, check that it is fully charged,
empty the dust container and clean the filter.
Check to see if the openings are clogged. Unplug and
clean if necessary.
Make sure the filter is correctly installed.
Empty the dust container and clean the filter.
Unplug the unit, check for clogged hair or dirt. If
necessary, remove the rotating shaft from the power
brush by unlocking the latch, clean and reposition the
shaft by performing the reverse procedure.
Make sure that the axle has been properly inserted into
the power brush and the latch is in the locked position.
The device may need to be recharged. Connect the
device to the charger. The battery indicator will turn
GREEN when charging is complete.
The motorized brush is blocked. Turn off the vacuum and
remove any object blocking the brush.
Solution
43