Assembly Of The Device - CONTINENTAL EDISON CEVCSFBF Guide D'utilisation

IV. ASSEMBLY OF THE DEVICE
Assembling the dust container
1. Place the cone into the dust container and match the cone pins in the grooves
inside the tank.
2. Place the filter on the cone.
Assembling the dust container with the engine block
Fit the dust container with the engine block.
Assembling the motorized brush with the tube and the engine block
1. Insert the upper end of the motorized brush into the lower end of the tube
until you hear a click.
2. Insert the top end of the tube into the bottom end of the tank until a click is
heard.
37