BIEMMEDUE SUSETTE Manuel D'instructions page 31

enabled, it will impose a 2 second delay between the gun opening
and motor start for work operations.
Functions (b), (c), (d), (e) and (h) can be deactivated if necessary for
special cleaner applications: contact a customer technical service
centre or your dealer to have this operation performed.
4. TRANSPORT AND INSTALLATION
4.1 HOISTING AND HANDLING
WARNING – Comply with the instructions below.
The machine will be delivered by the manufacturer packed in a
cardboard box and on a wooden pallet. Before unpacking, it may be
transported and handled using a forklift truck with a load capacity
greater than 250 kg.
Straps
Carton
To unpack the machine, cut the straps that secure the carton to the
pallet and then remove it. Once unpacked, the machine can be lifted
by running the hoisting slings through the hooks provided. Below are
some safety instructions for transport and handling operations.
The hoisting and handling operations required for installation are to
be undertaken using suitable equipment and by specialised
personnel who have been trained in this type of operation and who
will take every precaution provided for and recommended to prevent
harm to persons or property.
4.2 INSTALLATION
WARNING
Before proceeding with the installation, carefully read
the following warnings. Non-compliance with these
warnings could result in injury, death or damage to the
equipment.
The machine is delivered with its handle folded to save space; loosen
the knobs, position the handle and then tighten down the knobs.
5. DESCRIPTION OF THE SUPPLY
Below is a list of the contents of the package delivered to the
customer. If you find that any of the parts listed below are missing,
please contact the reseller immediately. To avoid losing it during
L-LC216.02-BM
EN
shipping, the spanner has been inserted in the bag containing the
technical documents.
1 machine
•
1 high pressure hose with M22 fittings
•
1 handle
•
• 1 jet nozzle lance
1 complete water coupling
•
1 hexagonal spanner D4
•
1 use and maintenance manual
•
1 spare parts booklet
•
6.1 SAFETY INSTRUCTIONS
6.1.1 Checks to be made before starting the machine.
6.2 PROHIBITED INTERVENTIONS
6.3 TRAINING
Pallet
All users should receive professional training and be able to practice
working with the machine. This training should emphasize the
following:
The need to pay attention and be focused whilst working;
•
Use by children or the disabled is prohibited
•
Hold the gun and entire lance firmly
•
Do not use the machine when placed on uneven surfaces
•
Do not direct the jet towards animals or persons
•
• Do not direct the spray towards any live parts
Do not disconnect the power plug by pulling on the cord
•
Do not use any extension cords
•
Do not use the machine with defective guards
•
7.1 WATER SUPPLY CONNECTION
Connect the machine to the water mains using a hose no smaller than
1/2" in size (use the supplied quick release coupling). Connect the
high-pressure hose to the machine and to the lance by firmly
screwing down the M22 diameter threaded couplings. Attach the
nozzle to the end of the lance and the lance to the gun.
7.2 ELECTRICITY CONNECTION
Attach the electrical plug to the cable. First make sure that the main
switch of the machine and the mains power switch are in the "OFF"
position and then connect the plug to the mains.
6. OPERATOR INSTRUCTIONS
WARNING
Non-compliance with these safety instructions could
result in injury or damage to the equipment.
WARNING
Before operating the machine, make sure all protection
devices are in their place and in good condition.
WARNING
Carrying out any adjustment, maintenance and/or
lubrication operations while the machine is running is
prohibited.
7. USE OF THE HIGH-PRESSURE WASHER
WARNING
31 / 56