GEHA Office X12 CD Mode D'emploi page 13

D. functions of the LcD Display
Display
Manual_Office_X12CDindd.indd 13
status
The device is ready for operation. The device can now be used.
The device is working.
Manual forward operation.
Manual reversed operation.
The waste paper container is full. Please empty the waste paper
The number of sheets fed in is
too high.
A paper jam is caused.
The cutting mechanism is
performing a self-cleaning
operation.
The motor is overheated.
actions
-----
The button 'FWD' is being
pressed.
The button 'REV' is being pressed.
container.
Remove the paper!
Remove the paper!
Please wait until the display
shows 'Ready'.
Wait at least 20 minutes.
Continue operation when the
display shows 'Ready'.
13
15.07.10 15:39