Oregon Scientific BAR206X Mode D'emploi page 8

TEMPERATURE AND HUMIDITy
To toggle temperature unit:
Press °C / °F.
To auto-scan between sensors:
Press and hold + MEM to display each sensor's data
for 3 seconds.
To end press .
To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM.
ICE WARNING
If the channel 1 sensor falls between 3°C to -2 °C (37°F
to 28°F), LED indicator will flash, and will stop flashing
once the temperature is out of this range.
BACkLIGHT
Press LIGHT to activate backlight for 5 seconds.
RESET
Press RESET to return to the default settings.
P/N: 300100678-00012-10 REV1.0
8/72
All manuals and user guides at all-guides.com
PRECAUTIONS
•
•
•
•
•
•
•
•
•
•
6
Use only fresh batteries of the required size and
type. Do not mix old and new batteries, different
types of batteries.
Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for
special treatment is necessary.
If you do not plan to use the product for a long time,
remove the batteries. Batteries can leak chemicals
that can damage electronic parts.
Do not subject the device to excessive force, shock,
dust, temperature or humidity.
Do not immerse the device in water. If you spill
liquid over it, dry it immediately with a soft, lint-free
cloth.
Do not clean the device with abrasive or corrosive
materials.
Do not tamper with
components. Doing so invalidates the warranty.
Images shown in this manual may differ from the
actual display.
When disposing of this product, ensure it is collected
separately for special treatment.
The contents of this manual may not be reproduced
without the permission of the manufacturer.
the device's internal