Bresser Temeo Hygro Quadro Mode D'emploi page 30

All manuals and user guides at all-guides.com
/- button to adjust the desired lower
humidity limit.
(8) Press and hold the ALARM / SET button
after setting the value when still fl ashing
to activate the alarm function.
(9) The alarm symbol (A10) appears on the
display.
(10) Save the setting with the ALARM / SET
button.
DISPLAY OF ADJUSTED ALARM VALUES
1. Press the ALARM /SET button in normal
mode to show the adjusted upper alarm
limits
2. Press again the ALARM / SET button in
normal mode to show the adjusted lower
alarm limits
3. Press again this button to return to normal
display
DEACTIVATING /ACTIVATING THE ALARM
(1) Press the CHANNEL / + button
until the arrow appears on the desired
channel.
(2) Press and hold ALARM / SET button for 3
seconds.
(3) Upper Temperature Alert limit starts fl ash-
ing on the display
(4) In Temperature and Humidity Alarm Mode,
each press of ALARM / SET button rotates
between:
• Upper Temperature Alert
• Lower Temperature Alert
• Upper Humidity Alert
• Lower Humidity Alert
(5) When the above alerts are displayed,
pressing ALARM/SET button for 3 sec-
onds will deactivate/activate the corre-
sponding alert.
25