Bresser Temeo Hygro Quadro Mode D'emploi page 25

All manuals and user guides at all-guides.com
Do not use batteries from different brands
or with different capacities. Remove the
batteries from the unit if it has not been used
for a long time.
ATTENTION!
The manufacturer is not liable for damage
related to improperly installed batteries!
SCOPE OF DELIVERY
Main unit (A), Remote sensor (B), Instruction
manual
Required batteries (not included with pur-
chase):
3x AAA / LR03 (1.5V) for Main Unit
6x AAA / LR03 (1.5V) for Outdoor Sensors
INSTALLATION OF MAIN UNIT
1. Open the battery compartment of the main
unit and insert three new batteries 1,5V
AAA, polarity as illustrated.
2. ALL LCD segments will be displayed for
about a few seconds.
3. Close the battery compartment.
INSTALLATION OF OUTDOOR SENSOR
1. Open the battery compartment of the
outdoor sensor with a screwdriver.
2. Insert two new batteries 1,5 AAA, the dis-
play shows the temperature and humidity
and the Channel number 1.
3. Press the °C and °F switch (D6) to select
temperature unit.
4. Use the Channel switch (D7) to change
between Channel 1, Channel 2 or Channel
3. There are a total of 3 outdoor sensors,
set all 3 to different channels.
MAIN UNIT
1. The measurements of the installed outdoor
21