Bresser Temeo Hygro Quadro Mode D'emploi page 28

All manuals and user guides at all-guides.com
symbol (A3) and the symbol of the comfort
level (A4).
[6] Then the radio-controlled reception symbol
disappears.
(2) MIN/MAX / - button
A. In normal mode, press and hold it more
than 3 seconds to switch °C and °F.
B. Press this button, MAX appears on the
display.
C. On the display appear the maximum
values since the last reset.
D. Press and hold the MIN/MAX- button to
delete the maximum values of the current-
ly selected channel.
E. Press this button again
F. MIN appears on the display
G. On the display appear the minimum values
since the last reset.
H. Press and hold the MIN/MAX- button to
delete the minimum values of the currently
selected channel.
I. Press again to go back to the display of the
present values.
NOTE: Press and hold the MIN/MAX /- or
CHANNEL / + button for a fast running.
SETTING THE ALARM FOR TEMPERATURE
AND HUMIDITY
1. Temperature alarm
(1) Press the CHANNEL /+ button until the
arrow appears on the desired channel
(channel 1-3, IN)
(2) Press and hold ALARM / SET button for
3 seconds.
(3) HI AL and upper temperature limit (CH
1-3: 70°C - default, IN: 60°C) start fl ash-
ing on the display.
(4) Press the CHANNEL /+ or MIN/MAX/-
button to adjust the desired upper
23