Publicité
ERROR LAMP
If the error lamp is lit, check the following:
1. Is the chargers positive lead con-
nected to the battery's positive
pole?
2. Is the charger connected to a 12V
battery?
3. Has charging been interrupted in
STEP 1, 2 or 5?
Restart the charger by pressing the MODE-
button. If charging is still being interrupted, the
battery...
STEP 1: ...is seriously sulfated and may need
to be replaced.
STEP 2: ...can not accept charge and may
need to be replaced.
STEP 5: ...can not keep charge and may need
to be replaced..
50013552C MXS 5.0 NA, Manual, Print file 002.indd 11
All manuals and user guides at all-guides.com
POWER LAMP
If the power lamp is lit with a:
MAINTENANCE
INSTRUCTIONS
The MXS 5.0 (1090) is maintenance-free. The charger must
not be opened; doing so will invalidate the warranty. If the
power cable is damaged the charger must be returned to the
retailer. The charger casing can be cleaned using a damp
cloth and mild cleaning agent. Remove the plug from the
power socket before cleaning.
1. STEADY LIGHT
The mains cable is connected to the wall socket.
2. FLASHING LIGHT
The charger has entered the energy save mode.
This happens if the charger isn't connected to a
battery in 2 minutes.
EN • 13
2016-11-21 15:01:26
Publicité
