Heatsail BEEM Mode D'emploi page 56

All manuals and user guides at all-guides.com
EN
S T E P 4
Screw the stems on the BEEM®.
Srew as tightly as possible.
Attention: do not forget the ceiling
canopy/canopies.
S T E P 5
Place the mounting brackets on
the stems.
Make sure that both of the screws
are tightened equally and that the
stems extrude at least 2 mm on the
top of the bracket as indicated.
Min 2 mm
56 Heatsail DOME®