Télécharger Imprimer la page

Sauder workense 427799 Hutch Mode D'emploi page 27

Publicité

Step 21
å
Refer to the enlarged diagram to identify the parts on the HINGES.
å
The DOOR may need some adjustments. Follow the text below to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOOR up and down (vertical), turn the adjusting screw in or out.
å
To adjust the DOOR from side to side (horizontal), loosen both horizontal adjustment screws. Move the DOOR side to side
to the desired location. Tighten the screws after making adjustments.
å
To adjust the DOOR in or out (depth), loosen the mounting screw one turn and move the DOOR in or out, as needed.
Tighten the mounting screw after making adjustments.
Hinge
(horizontal adjustment)
www.sauder.com/commercial-office/service
Adjusting screw
vertical
(
)
Mounting
screw
(depth)
427799
17
Page 27

Publicité

loading