Ariston MCA 15 NA P Mode D'emploi page 8

Starting and using
! Before starting the machine make sure the containers
NA
are filled with the amount described in the manual.
Prime the circuit immediately to prevent damage to the
machine.
! After starting the machine, regulate water hardness.
That will allow you to keep your machine in perfect
order (see Programming).
The first time you switch on
8
All manuals and user guides at all-guides.com
1. Open the front panel
by pressing firmly in the
center.
2. Remove the bean
container.
(to your convenience,
you can take out
complete container and
fill whenever you want
or even changhe the
container with another
one which is filled, for
example, with decaf
coffee).
3. Pour coffee beans into
the container being care-
ful not to add too many.
Close the lid and replace
the container inside the
machine.
The main switch is in the
"O" position. To switch
on, press the key in the
"I" position.
Close the front panel by pressing firmly in the centre.
The machine begins to heat up and the display shows:
RINSING
WARMING UP...
When the right temperature is reached, the machine
goes through a rinsing cycle.
RINSING
The machine dispenses water from the brew unit as it
rinses the internal circuits.
After rinsing, the machine returns to normal operating
conditions. The display shows:
SELECT PRODUCT
READY FOR USE
! To disable the rinse cycle, see the paragraph on
programming the machine.