Publicité
Les langues disponibles
Les langues disponibles
Display messages
Display messages
The machine's display informs the user of how it is to
be used.
Here is a list of the alarm messages that prevent
coffee brewing and what the user should do to solve
the problem.
STANDBY
• Press the
key.
READY FOR USE
DECALCIFY
• Descale the machine.
FILL WATERTANK
• Fill the water tank with fresh drinking water.
COFFEE BEANS EMPTY
READY FOR USE
• Fill the container with coffee beans and start the
coffee brew cycle.
WASTE TRAY FULL
• Open the door, remove the dregs drawer and empty
the dregs into a suitable container.
! Important note: The dregs drawer must only be
emptied when the machine is switched on. The dregs
drawer must be removed for at least 5 seconds. If the
drawer is emptied when the machine is switched off, it
will not be possible to brew coffee when switched back
on.
BREWUNIT MISSING
• Insert the brew group correctly.
WASTE TRAY MISSING
• Insert the drip tray and the dregs drawer correctly.
All manuals and user guides at all-guides.com
• Close the front door.
• Close the upper panel.
• Place a cup or suitable container below the steam
• Contact an authorised customer service center.
CLOSE DOOR
CLOSE CONTROL PANEL
VENTILATE
spout and press the
key.
Wait until the water runs smoothly out of the steam
spout.
To interrupt, press the
key.
BREWUNIT BLOCKED
GRINDER BLOCKED
NA
23
Publicité
