SNOWJOE 24V-X2-13SS-CT Manuel D'utilisation page 10

Assembly
Connecting the Poles
1. Connect the upper pole assembly with the middle pole
assembly. Align the screw holes (Fig. 4).
Fig. 4
Middle pole
assembly
2. Insert a bolt through the aligned holes in the poles and
secure the other end with a knob (Fig. 5). Twist until tight.
Fig. 5
Pole knob
3. Connect the upper pole + middle pole assembly with the
lower pole assembly. Align the screw holes (Fig. 6).
Fig. 6
Upper pole +
middle pole
assembly
4. Insert a bolt through the aligned holes in the poles and
secure the other end with a knob (Fig. 7). Twist until tight.
Fig. 7
Upper pole
assembly
NOTE: To avoid the wiring inside the poles intervening the
assembly, make sure to connect the upper pole assembly and
the middle pole assembly first. You may have to carefully move
the wiring inside the poles to one side when inserting the bolt.
Operation
m
toys or other foreign objects that the rotor blades might pick up
and throw. Such items could be covered by snow and are easy
to overlook, so be sure to conduct a thorough inspection of the
area before beginning work.
Starting the Machine
1. Slide the batteries down in the battery compartment until
Bolt
Fig. 8
2. To start the cordless snow shovel, push and hold the safety
Fig. 9
Lower pole
assembly
3. To stop the cordless snow shovel, release the On/Off
10
Pole knob
WARNING!
Keep the area to be cleared free of stones,
they click/lock into position (Fig. 8).
Battery
switch on the side of the handle grip with your thumb and
then squeeze the On/Off switch with your fingers. Once the
machine powers on, you can release the safety switch and
proceed with operation (Fig. 9).
Safety switch
On/Off switch
switch.
Bolt
Battery compartment