Télécharger Imprimer la page
SNOWJOE 24V-X2-13SS-CT Manuel D'utilisation
SNOWJOE 24V-X2-13SS-CT Manuel D'utilisation

SNOWJOE 24V-X2-13SS-CT Manuel D'utilisation

Pelle a neige sans cordon-outil seulement

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

OPERATOR'S MANUAL
A Division of Snow Joe, LLC
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all instructions before using this cordless snow shovel.
Basic safety precautions should always be followed to reduce
the risk of fire, electric shock and personal injury.
General Safety WARNINGS!
You and any other operator of this snow shovel must read,
understand and follow these instructions in their entirety, and
should reread them at the start of each snow season. Failure to
follow these instructions may result in ELECTRIC SHOCK, FIRE
and/or serious PERSONAL INJURY.
Notice the personal safety alert symbol
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION and
AWARENESS.
1. Keep work area clean and well lit – Cluttered, dark areas
invite accidents.
2. Use the right product – Do not use this machine for any
job except that for which it is intended.
3. Replacement parts – When servicing this unit, use only
identical replacement parts. Replace or repair damaged
cord immediately on the charger.
Do not use on gravel surfaces unless the snow shovel
is adjusted for such surfaces in accordance with the
operator's manual.
4. Keep children, bystanders and pets away – All
spectators, including pets, should be kept a safe distance
away from the work area.
5. Dress properly – Do not wear loose articles of clothing or
jewelry. They can become caught in moving parts. Wear
rubber boots.
The cordless snow shovel should not be operated in the
hand-held position except when the instructions provided in
this manual deem such use permissible.
6. Avoid accidental starting – Make sure the safety
switch and the On/Off switch are in the off position
before inserting the battery in the unit.
Do not carry the cordless snow shovel with the safety
switch and the On/Off switch engaged.
Original instructions.
© 2023 Snow Joe, LLC. All rights reserved.
CORDLESS SNOW SHOVEL – TOOL ONLY
R
48V MAX* | 13-INCH
Model 24V-X2-13SS-CT
m
used in this
7. Moving parts – Keep hands and feet away from moving
parts. Keep guards in place and in proper working order.
m
8.
CAUTION! Exercise caution to avoid slipping or falling.
Wear protective footwear that will protect your feet and
improve your footing on slippery surfaces.
9. Use safety glasses – Also use safety footwear,
snug-fitting clothing, protective gloves, hearing and
head protection.
10. Stay alert – Watch what you are doing. Use common
sense. Do not operate the cordless snow shovel when you
are tired or under the influence of alcohol or drugs.
11. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
12. Do not overreach – Keep proper footing and balance at all
times.
13. If the cordless snow shovel strikes a foreign object, follow
these steps:
• Stop the cordless snow shovel. Remove the battery.
• Inspect for damage.
• Repair any damage before restarting and operating
the snow shovel.
14. Disconnect the tool – Turn off the power switch and
remove the battery when it is not in use, before servicing it,
when changing accessories and when performing any other
maintenance task.
15. Store idle tool indoors – When not in use, the cordless
snow shovel should be stored indoors in a dry, locked
place out of the reach of children.
16. Maintain the cordless snow shovel with care – Follow the
applicable maintenance instructions for replacing parts and
changing accessories. Lubrication is not required.
m
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
Improperly using or maintaining this cordless snow
shovel could result in injury or death. To reduce this
potential, comply with the following safety instructions.
*Generates 48V max with two 24V lithium-ion batteries.
Initial no-load voltage, per fully charged battery, peaks at 24V.
1
Form No. SJ-24V-X2-13SS-CT-880E-M-FTY
Nominal voltage under typical load is 21.6V
SAVE THESE INSTRUCTIONS
EN

Publicité

loading

Sommaire des Matières pour SNOWJOE 24V-X2-13SS-CT

  • Page 1 48V MAX* | 13-INCH OPERATOR’S MANUAL Model 24V-X2-13SS-CT A Division of Snow Joe, LLC Form No. SJ-24V-X2-13SS-CT-880E-M-FTY IMPORTANT! 7. Moving parts – Keep hands and feet away from moving parts. Keep guards in place and in proper working order. Safety Instructions CAUTION! Exercise caution to avoid slipping or falling.
  • Page 2 This cordless snow shovel can amputate hands and feet the operating position, when transporting the unit, before unclogging the rotor blade housing and when making any if used incorrectly. It can also pick up foreign objects, repairs, adjustments or inspections to the unit. which can become dangerous projectiles when thrown into the air.
  • Page 3 Never carry the charger by its cord or yank it by the cord to disconnect Model 24V-X2-13SS-CT is compatible with the iON+ 24V System it from the receptacle. Keep the cord away from heat, oil batteries and chargers.
  • Page 4 ® + Sun Joe ® customer Information about the battery service center at 1-866-SNOWJOE (1-866-766-9563). 1. For optimum battery performance, avoid low discharge cycles by charging the battery pack frequently. 3. Electrical plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with 2.
  • Page 5 Protection from environmental influences 1. Wear suitable work clothes. Wear safety goggles. 2. Protect your cordless tool and the battery charger from moisture and rain. Moisture and rain can cause dangerous cell damage. 3. Do not use the cordless tool or the battery charger near vapors and flammable liquids.
  • Page 6 Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand WARNING! Do not expose the unit and follow all instructions in the to rain or wet conditions.
  • Page 7 Know Your Cordless Snow Shovel Read the owner’s manual and safety rules carefully before operating your cordless snow shovel. Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
  • Page 8 24V System batteries and chargers. See page 15 for The battery is at full capacity battery options and specifications, or visit snowjoe.com. 1. Carefully remove the cordless snow shovel and check to NOTE: If the charge level button does not appear to be working, see that all of the above items are supplied.
  • Page 9 Charging the Batteries Fig. 3 Battery pack 1. Press the push lock buttons on the batteries to pull them out of the equipment (Fig. 1). Charging Fig. 1 Fully Charged green 24VCHRG-DPC Dual-Port Charger (Sold separately) Push lock button 3. The battery indicator LEDs will illuminate one by one during 2.
  • Page 10 Assembly Fig. 7 Connecting the Poles 1. Connect the upper pole assembly with the middle pole assembly. Align the screw holes (Fig. 4). Bolt Pole knob Fig. 4 Upper pole assembly NOTE: To avoid the wiring inside the poles intervening the assembly, make sure to connect the upper pole assembly and the middle pole assembly first.
  • Page 11 Hang the shovel so it will not be misplaced or damaged. Belt Maintenance To order genuine replacement parts or accessories for the Snow Joe ® 24V-X2-13SS-CT cordless snow shovel, please visit snowjoe.com or contact the Snow Joe + Sun Joe customer ® ®...
  • Page 12 3. Remove the screws, the washers from the drive wheel 6. From the left side, remove the auger axle set (Fig. 16). (Fig. 13). Fig. 16 Fig. 13 Auger axle set Washer Screw 7. Remove the old auger from the housing (Fig. 17). 4.
  • Page 13 + Sun Joe customer ® ® ® Fig. 20 service center at 1-866-SNOWJOE (1-866-766-9563) for assistance. 2. Remove the batteries from the cordless snow shovel before Remove storing. the screws 3. Store the cordless snow shovel indoors in a locked, dry place out of the reach of children to prevent unauthorized use or damage.
  • Page 14 7. Batteries should be recycled or disposed of as per state and local guidelines. Service and Support If your Snow Joe ® 24V-X2-13SS-CT cordless snow shovel requires service or maintenance, please call the Snow Joe ® + Sun Joe customer service center at 1-866-SNOWJOE ®...
  • Page 15 NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe . Accessories can be ordered ® ® online at snowjoe.com or via phone by contacting the Snow Joe ® + Sun Joe ® customer service center at 1-866-SNOWJOE...
  • Page 16 PRODUCT REGISTRATION: Snow Joe strongly encourages you to register your Product. You can register online at snowjoe.com/register, or by printing and mailing in a registration card available online from our website, or by calling our Customer Service Department at 1-866-SNOWJOE (1-866-766-9563), or by e-mailing us at help@snowjoe.com.
  • Page 19 48 V MÁX.* | 33 CM MANUAL DEL OPERADOR Modelo 24V-X2-13SS-CT Una división de Snow Joe, LLC Forma Nº SJ-24V-X2-13SS-CT-880S-M-FTY ¡IMPORTANTE! 6. Evite encendidos accidentales: asegúrese de que el interruptor de seguridad y el interruptor de encendido/ Instrucciones de seguridad apagado estén en la posición de apagado antes de...
  • Page 20 Operación 16. Cuide su pala quitanieve inalámbrica: siga las instrucciones aplicables de mantenimiento para el • No ponga sus manos o pies cerca o debajo de las partes reemplazo de partes y cambio de accesorios. No se giratorias. Manténgase alejado de la abertura de descarga requiere lubricación en todo momento.
  • Page 21 Deben ser adquiridos por separado. El batería siendo cargada. Los gases presentes pueden modelo 24V-X2-13SS-CT es compatible con las baterías y explotar. cargadores del sistema iON+ de 24 V. Vea la página 34 para NOTA: el rango seguro de temperatura para la batería es...
  • Page 22 ® llamando prolongado o la falta de uso de baterías parcialmente al 1-866-SNOWJOE (1-866-766-9563) para obtener ayuda. descargadas. Deje de trabajar tan pronto como el • Los químicos de la batería causan quemaduras severas: rendimiento de la batería caiga considerablemente o se nunca deje que una batería dañada haga contacto con...
  • Page 23 En particular, no deje el cargador de batería en un auto central de servicio al cliente estacionado bajo la luz directa del sol. Snow Joe + Sun Joe llamando al 1-866-SNOWJOE ® ® 6. Proteja las baterías contra el sobrecalentamiento. Las (1-866-766-9563).
  • Page 24 Símbolos de seguridad La siguiente tabla muestra y describe los símbolos de seguridad que pueden aparecer en este producto. Lea, comprenda y siga todas las instrucciones de la máquina antes de intentar ensamblarla y operarla. Símbolo Descripción Símbolo Descripción LEA EL(LOS) MANUAL(ES) DEL OPERADOR: lea, comprenda y ¡ADVERTENCIA! No exponga la unidad siga todas las instrucciones en...
  • Page 25 Conozca su pala quitanieve inalámbrica Lea detenidamente este manual del propietario y las reglas de seguridad antes de operar su pala quitanieve inalámbrica. Compare la ilustración debajo con la unidad real para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencias futuras.
  • Page 26 + Sun Joe ® ® mostrará algunos minutos después. Las celdas de las baterías llamando al 1-866-SNOWJOE (1-866-766-9563). “recuperan” parte de su carga luego de permanecer inactivas. NOTA: No se deshaga de la caja de transporte ni de los Operación del cargador materiales de embalaje hasta que usted esté...
  • Page 27 Carga de las baterías Fig. 3 Batería 1. Presione los botones pulsadores de trabado en las baterías para poder extraer las baterías fuera del quitanieve (Fig. 1). Cargando Fig. 1 Rojo Carga completa Verde Cargador de doble puerto 24VCHRG-DPC (de venta por separado) Botón pulsador de trabado 3.
  • Page 28 Ensamblado Fig. 6 Conexión de los mangos 1. Conecte el ensamblado de mango superior con el ensamblado de mango intermedio. Alinee los orificios de los tornillos (Fig. 4). Ensamblado de mango superior + Fig. 4 intermedio Ensamblado de Ensamblado mango superior de mango inferior 4.
  • Page 29 3. Para detener la pala quitanieve inalámbrica, suelte el pala quitanieve inalámbrica 24V-X2-13SS-CT de Snow Joe interruptor de encendido/apagado. ® visite snowjoe.com o comuníquese con la central de servicio Colocación de la empuñadura auxiliar. al cliente Snow Joe ® + Sun Joe ®...
  • Page 30 aisladas. Algunos de estos incluyen gasolina, trementina, 3. Retire los tornillos y arandelas de la rueda motriz (Fig. 13). diluyente de laca, diluyente de pintura, solventes clorados para limpieza, amoniaco y detergentes caseros con Fig. 13 amoniaco. Nunca use solventes inflamables o combustibles cerca de baterías, cargadores de batería, o herramientas motorizadas.
  • Page 31 6. Desde el lado izquierdo, retire el juego de eje de barrena (Fig. 16). Fig. 19 Fig. 16 Rueda motriz Correa Juego de eje de barrena Barrena 7. Retire la barrena gastada de la carcasa (Fig. 17). 3. Instale una nueva correa en su lugar. Coloque la cubierta Fig.
  • Page 32 + Sun Joe llamando ® ® manual para obtener la información específica. al 1-866-SNOWJOE (1-866-766-9563) para obtener 2. Instale solo nuevas baterías del mismo tipo en su producto asistencia. (donde corresponda). 2. Retire la batería de la pala quitanieve inalámbrica antes de 3.
  • Page 33 Servicio y soporte Si su pala quitanieve inalámbrica 24V-X2-13SS-CT de Snow Joe requiere servicio o mantenimiento, comuníquese con ® la central de servicio al cliente Snow Joe + Sun Joe llamando ® ® al 1-866-SNOWJOE (1-866-766-9563). Modelo y número de serie Al comunicarse con la empresa, ordenar partes de repuesto o programar una reparación en un centro autorizado, usted...
  • Page 34 NOTA: los accesorios están sujetos a cambios sin obligación alguna por parte de Snow Joe ® + Sun Joe ® . Los accesorios se pueden ordenar en línea visitando snowjoe.com o por teléfono llamando a la central de servicio al cliente Snow Joe + Sun Joe ® ® 1-866-SNOWJOE (1-866-766-9563).
  • Page 35 Web, llamando a nuestra central de servicio al cliente al 1-866-SNOWJOE (1-866-766-9563), o enviándonos un e-mail a help@snowjoe.com. Si usted no registra su Producto, sus derechos de garantía no disminuirán;...
  • Page 37 OUTIL SEULEMENT 48 V MAX.* | 33 cm MANUEL D'UTILISATION Modèle 24V-X2-13SS-CT Une division de Snow Joe, LLC Formulaire n° SJ-24V-X2-13SS-CT-880F-M-FTY IMPORTANT! 5. S’habiller en conséquence – Ne portez ni articles vestimentaires amples ni bijoux. Ils peuvent être happés par Consignes de sécurité les pièces mobiles. Portez des bottes de caoutchouc.
  • Page 38 15. Lorsqu’elle n’est pas utilisée, ranger la machine à • Portez toujours des lunettes de sécurité ou une protection l’intérieur – Lorsque vous ne l’utilisez pas, la pelle à neige des yeux pendant l’utilisation et lors de réglages ou de sans cordon doit être remisée à...
  • Page 39 Ils doivent être achetés pourrait provoquer un incendie. séparément. Le modèle 24V-X2-13SS-CT est compatible avec • Chargez dans un endroit bien ventilé : ne bloquez pas les les batteries et chargeurs du système iON+ 24V. Pour plus de orifices de ventilation du chargeur.
  • Page 40 Remplacez immédiatement toute batterie qui est + Sun Joe ® au 1-866-SNOWJOE (1-866-766-9563) pour de tombée d’une hauteur supérieure à un mètre ou qui a été l’aide. soumise à des chocs violents, même si le boîtier du bloc- piles ne semble pas endommagé.
  • Page 41 ® où la température est susceptible d’être supérieure à Sun Joe ® au 1-866-SNOWJOE (1-866-766-9563). 40,5 °C. Ne laissez surtout pas le chargeur de batterie dans 3. Les fiches électriques doivent correspondre à la prise. une voiture qui stationne au soleil.
  • Page 42 Symboles de sécurité Le tableau suivant décrit et explique les symboles de sécurité pouvant être marqués sur cette machine. Avant d’essayer de procéder à son assemblage et de l’utiliser, lisez, comprenez et suivez toutes les instructions sur cette machine. Symboles Descriptions Symboles Descriptions...
  • Page 43 Apprenez à mieux connaître votre pelle à neige sans cordon Avant d’utiliser votre pelle à neige sans cordon, lisez attentivement le manuel d’utilisation et les consignes de sécurité. Comparez l’illustration ci-dessous avec votre machine afin de vous familiariser avec l’emplacement des différents réglages et commandes. Conservez ce manuel pour pouvoir le consulter dans le futur.
  • Page 44 Pour les options et spécifications de batteries, veuillez consulter Bouton de niveau de charge la page 52 ou vous rendre sur le site snowjoe.com. La batterie est à 30 % de sa capacité et 1. Retirez soigneusement la pelle à neige sans cordon de la nécessite d’être chargée...
  • Page 45 Comment charger les batteries 1. Appuyez sur le bouton-poussoir de verrouillage de chaque Fig. 3 Blocs-piles batterie pour les sortir de la machine en les tirant (Fig. 1). Charge en Fig. 1 cours rouge À charge complète vert Double chargeur 24VCHRG-DPC (vendu séparément) Bouton-poussoir de verrouillage...
  • Page 46 Assemblage 4. Insérez un boulon en le faisant passer à travers les trous alignés des éléments du manche et attachez l'autre extrémité à l'aide d'un bouton (Fig. 7). Tournez jusqu'à ce Raccordement des éléments du manche que le boulon soit bien serré. 1.
  • Page 47 Pour commander des pièces de rechange ou des accessoires Réglage de la poignée auxiliaire d’origine pour la pelle à neige sans cordon Snow Joe ® 24V-X2-13SS-CT, veuillez vous rendre sur le site www.snowjoe.com 1. Desserrez le bouton de poignée auxiliaire. ou communiquer avec le service clientèle Snow Joe ®...
  • Page 48 Remplacement de la tarière 4. Démontez le couvercle latéral droit en retirant les quatre AVERTISSEMENT! S’assurer d’arrêter la machine et de (4) vis qui le maintiennent en place (Fig. 14). retirer la batterie avant de procéder à toute tâche d’entretien sur la pelle à neige sans cordon. Fig.
  • Page 49 7. Retirez de son logement la tarière à remplacer (Fig. 17). 3. Posez une courroie neuve à la place de l’ancienne courroie. Remettez en place le couvercle latéral gauche et revissez les quatre (4) vis. Fig. 17 Remplacement de la lame de raclage AVERTISSEMENT! S’assurer d’arrêter la machine et de retirer la batterie avant de procéder à...
  • Page 50 + Sun Joe ® ® bloc-piles de provoquer un court-circuit, ce qui pourrait causer 1-866-SNOWJOE (1-866-766-9563) pour de l’aide. un incendie ou une explosion. 2. Retirez la batterie de la pelle à neige sans cordon avant de le remiser. AVERTISSEMENT! Pour réduire le risque de blessure...
  • Page 51 Service après-vente et assistance technique Si votre pelle à neige sans cordon Snow Joe ® 24V-X2-13SS-CT nécessite une réparation ou un entretien, veuillez appeler le service clientèle Snow Joe + Sun Joe ® ® 1-866-SNOWJOE (1-866-766-9563). Numéros de modèle et de série Lorsque vous communiquez avec l’entreprise pour commander...
  • Page 52 REMARQUE : les accessoires sont sous réserve de changement sans aucune obligation de la part de Snow Joe ® + Sun Joe ® . Les accessoires peuvent être commandés en ligne sur le site snowjoe.com ou par téléphone en appelant le service clientèle Snow Joe + Sun Joe au 1-866-SNOWJOE (1-866-766-9563). ®...
  • Page 53 Snow Joe vous recommande vivement d’enregistrer votre Produit. Vous pouvez l’enregistrer en ligne sur le site snowjoe.com/register, ou en imprimant et en envoyant par courrier une carte d’enregistrement offerte en ligne sur notre site Web, ou par téléphone en appelant notre Service à la clientèle au 1-866-SNOWJOE (1-866-766-9563), ou encore en nous envoyant un courriel à...
  • Page 56 snowjoe.com...