Inventum VWM8010W Manuel D'utilisation page 48

CLEANING THE RUBBER DOOR GASKET AND THE GLASS
Wipe the glass and rubber door gasket after each wash to remove lint and
stains and to extend its useful life. If lint builds up, it can cause leakages.
Check the rubber door gasket to remove any coins, buttons or other
objects after each wash.
Clean the rubber door gasket and the glass once a month to ensure
normal operation of the appliance.
CLEANING THE INLET FILTER
i
NOTE!
• A diminishing water flow is a sign that the inlet filter needs to be cleaned.
• Cleaning the inlet filter every 3 months ensures normal operation of the appliance.
Cleaning the inlet filter in the water tap
1. Close the water tap and remove the water supply hose.
2. Clean the inlet filter with a brush under running water.
3. Reconnect the water supply hose to the water tap.
Cleaning the inlet filter at the back of the appliance
1. Close the water tap.
2. Unscrew the water supply hose from the back of the appliance.
3. Pull out the filter with a long nose plier and clean the filter using
a brush under running water.
4. Reinstall the filter to the water inlet and reconnect the water supply hose.
5. Open the water tap.
CLEANING THE DISPENSER TRAY
1. Open the dispenser tray and press down the release [
cover of the softener compartment and pull the dispenser tray out
of the recess.
2. Lift the cover of the softener compartment of the dispenser tray.
Wash both items, the cover and the complete dispenser tray under
running water. Make sure not to forget to clean the drain hole of
the softener compartment and the openings at the bottom of
the dispenser tray.
3. Clean the inside of the recess with a brush.
4. Reinstall the cover of the softener compartment and push the
dispenser tray back in the recess.
i
• Do not use abrasive or caustic agents to clean plastic parts.
• Cleaning the dispenser tray every 3 months ensures normal operation of the appliance.
48
• English
1
1
1
] on the
3
2
2
2
4