Publicité
EN
c)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
d)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
e)
Do not put your hands or other items inside the
device while it is in use!
2.4. SAFE DEVICE USE
a)
Do not overload the device. Use the appropriate
tools for the given task. A correctly-selected device
will perform the task for which it was designed better
and in a safer manner.
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c)
Make sure the plug is disconnected from the socket
before attempting any adjustments, accessory
replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally
activating the device.
d)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
e)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
f)
Keep the device out of the reach of children.
g)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
h)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
i)
Do not leave this appliance unattended while it is in
use.
j)
Clean the device regularly to prevent stubborn grime
from accumulating.
k)
Do not cover the air intake and outlet.
l)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
m)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
n)
Keep the device away from sources of fire and heat.
o)
Do not cover the ventilation openings!
p)
Before and after use, always empty the tank and
clean the vacuum cleaner to avoid accumulation of
substances which may cause a fire inside the device.
q)
During use, check the hoses and the device for
overheating. If you notice signs of overheating, turn
the device off and let it cool down.
r)
The device is used to remove cold ash. Cold ash is
free heat and it does not emit heat. Always verify that
the ash is not hot using, for example, a metal poker.
8
s)
Do not use the device with no filter installed.
t)
Only fireproof filters should be used in the device.
u)
Do not use the device to vacuum:
•
soot,
•
flammable and corrosive substances,
•
dust hazardous to health (L, M, H class dust),
•
hot, glowing or burning substances,
•
substances whose temperature exceeds 40°C,
•
liquids.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is designed to clean fireplaces, barbecues and
stoves from cold ash.
The product is intended for home use only!
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
2
3
1
4
5
6
8
7
1.
ON / OFF button
2.
Air outlet
3.
Handle
4.
Soft suction hose
5.
Aluminum tip
6.
Air inlet
7.
Battery
8.
Charger
1
2
3
4
1.
Heat-resistant filter
2.
HEPA filter
3.
Metal protective mesh
4.
HEPA filter in protective metal mesh
3.2. PREPARING FOR USE
ASSEMBLING THE DEVICE
1
2
3
9
EN
1.
Loosen the hinges and lift the cover of the device.
2.
Attach the filter set to the bottom of the cover.
3.
Place the cover with the installed filters in the
container and close the hinges.
4.
Install the battery in the battery compartment on the
device cover.
5.
Connect the aluminum end with the soft suction
hose. Insert the other end of the suction hose into
the air inlet.
THE BLOW FUNCTION
1.
Connect the aluminum end with the soft suction
hose. Insert the other end of the suction hose into
the air outlet.
3.3. DEVICE USE
1.
Switch the device on with the ON / OFF button.
2.
Vacuum the ash directly from the fireplace or stove
using the aluminum tip.
3.
Press the ON / OFF button to switch off the vacuum
cleaner.
VACUUMING THE ASH
•
Always use a heat-resistant filter when vacuuming ash.
•
When the container is full, empty it.
•
If the suction power decreases, the vacuum cleaner
does not pick up any more ash and the container is
empty, remove and clean the filter.
•
When vacuuming ash from the fireplace, the ash
temperature must be below 40 ° C. Ashes that are
still glowing should not be vacuumed!
AFTER USE
1.
Press the ON / OFF button to turn off the vacuum
cleaner.
2.
Disconnect the suction hose from the machine.
3.
Pull the battery out of the device.
4.
If necessary, charge the battery with the charger.
5.
Remove the cover from the device.
6.
Empty the dirt from the container and wash it.
7.
Dry the container thoroughly.
8.
Remove the filter, clean its outside of coarse dirt
and wash the filter thoroughly under running water
(direct the stream of water only from the inside of
the filter!).
9.
Before reinstalling the filter, dry it thoroughly.
Publicité
