Publicité
Les langues disponibles
Les langues disponibles
Mode A: Separate Operation
The lamp works separately without solar panel connected, the light sensor and the PIR sensor are
both disabled, the lamp works at constant brightness.
A1 mode: Press the button 1st time, it lights up with 30% brightness.
A2 mode: press the button 2nd time, it changes to 100% brightness.
A3 mode: Press the button 3rd time, it turns off.
Mode B: Working Together
The lamp works with solar panel connected together, both light sensor and PIR sensor will be activated
automatically.
B1 mode: press the button 1st time, automatically turn on to 100% brightness (1100lm) at night when
motion detected in the range ≤8m, then dim to 5% brightness in 20 seconds without motion.
B2 mode: press the button 2nd time, automatically lights up at night and constantly stays at 100%
brightness (1100lm), after 5 hours or when the battery capacity is less than 30%, it will switch to B1
mode .
Mode B3: Press the button 3rd time, it turns off.
Mode C: Power bank
The lamp works as a power bank with charging and discharging function.
* Can charge mobile phone 2-3 times.
Distribué par / Distribuito da / Distributed by / Vertrieben von NETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers
DC interface → External microphone: DC5V, the maximum charging current is
1.5A.
* External DC5V input is required, current is not limited. However please note
that the maximum charging current of Micro is 1.5A.
* It takes about 5 hours for a full 1.5A charge.
USB → external DC interface: DC5V, 1.0A
Publicité
