Publicité
Les langues disponibles
Les langues disponibles
5 Operation
• Only cut a small amount the first
time you use it. This is the only
way to get used to the variable
positions.
• Keep combing the hair. Only look
for hair which is too long and
comb out clippings.
5.2 Beard trimming
1. Place the cutting head (1) on the
beard.
2. Move the cutting head (1)
against the direction of hair
growth. Apply only a slight
pressure when cutting with
slow, gentle movements.
5.2.1 Useful tips
• The combs are designed for
easy removal of excess hair and
clean the cutting head (1) with
the brush supplied. Clean the
appliance as described in the
"Cleaning and Care" section.
• For trimming contours, remove
the detachable blade. Use the
appliance without the combs
(cutting length is 1.5 mm).
40 / EN
5.3 High speed setting
button (2) (Turbo)
Device performance can be maxi-
mized by pushing the turbo button
(2).
5.4 The usage of the
BeardCare sensor
The BeardCare sensor detects in
real time the density of the beard
hair and adjusts the power of the
motor accordingly. At Turbo Mode,
the BeardCare sensor will be inac-
tive.
Hair and Beard Clipper / User Manual
Publicité
