Grundig tehnoteka MC 8030 Mode D'emploi page 36

2 Overview
2.1 Controls and parts
See the illustrations on page 3.
1. Cutting head
2. High speed setting button
(Turbo)
3. On/Off switch
4. LED Light
5. Body
Accessories
6. 3-15 mm comb
7. 18-30 mm comb
Other Accessories
Power adapter
Charging plug
Cleaning brush
Oil
2.2 Technical data
Operating temperature:
+5˚C - +40˚C
Storage temperature:
0˚C -+40˚C
Parameter of External Power
Supply
Manufacturer: E-TEK Electronics
Manufactory CO., LTD
Hair and Beard Clipper / User Manual
Model Identifier:
ZD006M050100EU
Input Voltage: 100-240V~
Input Frequency: 50/60Hz
Input Current: 0.3A
Output Voltage: 5.0V DC
Output Current: 1.0A
Output Power: 5.0W
Average active efficiency:
77.74%
Efficiency at low load(10%):
73.15%
No-load power consumption:
0.042W
Protection class:
Hair clipper IPX7
Adaptor IPX4
Batteries: Li-ion (Lithium-ion
rechargeable battery)
Electrical insulation class: II
Design and specifications subject
to change without notice.
The values which are declared in the markings affixed
on your appliance or other printed documents supplied
with it represent the values which were obtained in the
laboratories pursuant to the pertinent standards. These
values may vary according to the usage of the appliance
and ambient conditions.
35 / EN