Publicité
Les langues disponibles
Les langues disponibles
Problem
Possible Cause
1. Dimmer control
button set too Low.
2. LED bulb are
burned out.
3. "Flame wand" has
come loose from
bracket.
4. "Flame wand" motor
is not functioning.
The appliance
1. The overheat
turns off and will
protection device in the
not turn back on
appliance has been
triggered.
2. House circuit breaker
has been tripped
The appliance
1. The overheat
does not turn on
protection device in
when the button is
the appliance has
pushed to "ON"
been triggered.
Remote control
1. Low batteries.
does not work
2. Manual control on
the appliance must be
"ON" before operating
the remote control.
12
Corrective Action
1. Push Dimmer button
to increase light
2. Contact with the
technical person
3. Remove back panel.
Secure end of "flame
wand" back into the
support bracket
4. Ask qualified
technician for help.
1. Turn all controls off,
unplug the appliance,
allow to cool for at
least 10 minutes, then
plug back in and
restart.
2. Reset house circuit
breaker.
1. Turn all controls off,
unplug the appliance.
Allow to cool for at least
10 minutes, then plug
back in and restart.
1. Replace all batteries
in the remote control
2. Push the appliance
"ON" using the manual
control panel, then use
remote control to
operate. If using the
remote control the
appliance, you must
also turn on the
appliance "ON" using
the remote control
FR
INFORMATIONS SUR LA SÉCURITÉ DES
CONSOMMATEURS
Lisez ce manuel avant d'installer et d'utiliser cet appareil
●
Le non-respect de ces instructions peut entraîner un choc
●
électrique, un incendie ou des blessures corporelles.
Ne stockez pas et n'utilisez pas d'essence ou d'autres liquides
●
inflammables à proximité de cet appareil.
13
Publicité
