Publicité
Les langues disponibles
Les langues disponibles
TIMER button: Control timer
settings to turn off fireplace at
selected time.
TEMPERATURE button:
Increase the heat output.
TEMPERATURE button:
Decrease the heat output.
PREPARATION
This insert has front panel made of GLASS! ALWAYS use extreme
caution when handling glass. Failure to do so could result in personal
injury or property damage.
Remove all parts and hardware from the carton and place them on a clean,
soft, dry surface. Check the parts list to make sure nothing is missing.
Dispose of packaging materials properly. Please recycle whenever possible.
Tools required for assembly:
PARTS & HARDWARE
Item
1
2
3
08
1. Press once. Indicator light
turn on. Temperature is set to
hours.
2. Press again until desired
setting is reached. LED
display show setting.
1. Increase the heat output.
1. Decrease the heat output.
Phillips screwdriver
(Not included)
Description
Fireplace insert
Screws 4x12mm
Rubber feet
Step 1. Lay the heater on the floor or a table. Install the rubber mat with
4pcs screws ( screws are on the bottom of the fireplace) as provided
Qty
1
8
Step 2. Put the appliance into mantel, fasten them with 4pcs of screws.
4
09
Publicité
