sanindusa SAFIRA Notice De Montage page 10

1
Sanindusa S.A. reserva o direito de fazer alterações técnicas sem aviso prévio.
Sanindusa S.A. reserva el derecho de hacer alteraciones técnicas sin previo aviso.
Step 5 - Fitting Caps and Sealing
1. Seal both Wall Profiles vertically, both internally and externally where they meet the tiles.
2. Seal the base of the Door and Panel to the top of the tray from wall to wall on the outside only.
• IMPORTANT: Failure to carry out stages 1 and 2 may result in serious water damage and is not
covered under the terms of the guarantee.
• DO NOT seal the base of the product to the inside, failure to comply may result in the product leak-
ing.
• Allow 24 hours for the sealant to fully cure prior to using the shower.
3. The Top Caps have grooves and can be shortened by snapping off at these points.
2
Sanindusa S.A. reserves the right to introduce technical improvements without previous notice.
3
Sanindusa S.A. réserve le droit de faire des altérations techniques sans information prealable.
Sanindusa S.A. si reserva il diritto di effettuarre cambiamenti tecnici sensa preaviso.
Snap off
here
5