Publicité
Les langues disponibles
Les langues disponibles
4
Technical data
Rated voltage
Weight including battery B22⁄8.0
Crimping / pressing time
Max. permissible crimping capacity
Max. crimping / pressing force
Storage temperature
Ambient temperature for operation
4.1
Battery
Battery operating voltage
Ambient temperature
Storage temperature
Battery charging starting temperature
5
Operation
5.1
Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
WARNING
Risk of injury by incorrectly positioned crimping jaws! Incorrectly positioned crimping jaws can fly out
like projectiles and cause injuries.
▶ Before and during the crimping operation, make sure that the crimping jaws are correctly positioned.
CAUTION
Risk of injury! The accessory tool may be hot and/or have sharp edges.
▶ Wear protective gloves when changing the accessory tool.
▶ Never lay down a hot accessory tool on a flammable surface.
Observe the safety instructions and warnings in this documentation and on the product.
5.2
Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery. → page 5
*2215655*
2215655
21.6 V
7.5 kg
(16.5 lb)
8 s ... 9 s
•
750 MCM
(400 mm²) Cu
•
750 MCM
(400 mm²) Al
120 kN
(27,000 lb
)
f
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
21.6 V
−10 ℃ ... 60 ℃
(14 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 45 ℃
(14 ℉ ... 113 ℉)
English
7
Publicité
