DeFelsko PosiTest HHD Serie Notice D'instruction page 12

Before returning the PosiTest HHD C for service –
1. Install fully charged batteries in the correct orientation.
2. Inspect all wires, plugs, and connectors for damage.
3. Power up PosiTest HHD C by pressing the power button
4. Press and hold the trigger.
5. Touch the electrode to ground (earth) to simulate a holiday.
6. If the PosiTest HHD C does not activate the Audio and Strobe
alarms or create an arc, remove the batteries and return the
PosiTest HHD C without the batteries for service.
If you must return the PosiTest HHD C for service,
IMPORTANT:
please follow the instructions provided at
https://www.defelsko.com/service-support#Service
Limited Warranty, Sole Remedy
DeFelsko's sole warranty, remedy, and liability are the express
limited warranty, remedy, and limited liability that are set forth on
its website: www.defelsko.com/terms
This manual is copyrighted with all rights reserved and may not be reproduced or transmitted,
in whole or part, by any means, without written permission from DeFelsko Corporation.
DeFelsko, PosiTest, PosiTector, and PosiSoft are trademarks of DeFelsko Corporation
registered in the U.S. and in other countries. Other brand or product names are trademarks
or registered trademarks of their respective holders.
Every effort has been made to ensure that the information in this manual is accurate.
DeFelsko is not responsible for printing or clerical errors.
Returning for Service
and Limited Liability
www.defelsko.com
© 2023 DeFelsko Corporation USA All Rights Reserved
.