Servicing; Cleaning; Service Intervals - Parker 20H Guide D'utilisation

5 Servicing

The recommended service procedures identified below, along with all other repair and calibration work, should be undertaken by a Parker
Hannifin approved engineer.

5.1 Cleaning

Clean the equipment with a damp cloth only and avoid excessive moisture around any electrical sockets. If required you may use a mild
detergent, however do not use abrasives or solvents as they may damage the warning labels on the equipment.

5.1.1 Service Intervals

Component
Generator Check the power ON indicator is illuminated.
Generator Check the STATUS / FAULT Indicator on the control panel.
Generator Check the water level.
Generator Check the water conductivity.
Generator Check the water bottle spillage drains
Generator Check for leaks.
Recommended Service A
Generator
6 Month Service.
Recommended Service B
Generator
24 Month Service.
Recommended Service C
Generator
Check the desiccant cartridge and replace if opaque.
Service
A
B
Key:
Check
servicereminder.com
Servicereminder.com is a web based reminder service developed to track when service work is due to be carried out. This ensures that parts can be ordered in
advance and that the service is carried out at the optimum time in accordance with the manufacturers recommendations. This service is free to use, simply log on
to www.servicereminder.com and select New User Registration.
Operation
Essential Procedure
17