Publicité
Les langues disponibles
Les langues disponibles
WARNING: The used lancet and test strip may be biohazardous. Please discard them carefully
according to your local regulations.
7.4. ALTERNATIVE
SITE TESTING
You can test on a variety of
locations on your body.
The AST (Alternative Site
Testing) should be used
only during steady-state
blood glucose conditions.
Please consult your health
care professional before
Suggested Test Areas
you perform AST.
WHEN TO USE AST?
Food, medication, illness, stress and exercise can affect blood glucose levels. Capillary
blood at the fingertip reflects these changes faster than capillary blood at other sites.
Thus, when testing blood glucose during or immediately after a meal, physical exercise,
or any other event, take a blood sample from your finger only.
Alternative Site Testing should be done during steady-state times (when glucose is not
changing rapidly)
We strongly recommend that you perform AST ONLY at the following times:
• In a pre-meal or fasting state (more than 2 hours since the last meal).
• Two hours or more after taking insulin.
• Two hours or more after exercise.
DO NOT USE AST IF
• You think your blood glucose is low.
• You are unaware of hypoglycemia
• You are testing for hyperglycemia
• Your AST results do not match the way you feel.
• Your routine glucose results often fluctuate.
16
BewellConnect - BW-GL1 - User Manual - 022017v1
All manuals and user guides at all-guides.com
for the Hand
8. METER MEMORY
The meter stores the 450 most recent blood glucose test results along with respec-
tive dates and times in its memory. To enter the meter memory, start with the meter
switched off.
8.1. REVIEWING TEST RESULTS
1. Press and release M.
Upper Arm
" will appear on the display. Press M again, and the first reading you see is the
"
Forearm
last blood glucose result along with date, time and the measuring mode.
2. Press UP or DOWN to recall the test results stored in the meter each time you
press. After the last test result, press M again and the meter will be turned off.
8.2. REVIEWING BLOOD GLUCOSE DAY AVERAGED RESULTS
1. Press and release M. When "
seconds until the flashing "
result measured in general mode will appear on the display.
2. Press M to review 14-, 21-, 28-, 60- and 90- day average results stored in memory.
3. Exit the meter memory.
Keep pressing the M and the meter will turn off after displaying the last test result.
NOTE:
• Any time you wish to exit the memory, keep pressing M for 5 seconds or leave it without any
action for 3 minutes. The meter will switch off automatically.
• Control solution results are NOT included in the day average.
DOWNLOAD APPLICATION
BW-GL1 can also be used in conjunction with the BewellConnect® application, available on
the APP Store and Play Store for free download.
The following information may be modified.
Download the BewellConnect® app on your mobile or tablet :
- App store or Google Play
- scan the QR Code on the side of the box
Then click on the MyGluco icon.
It is simple and intuitive to use, for better understanding of your current condition and to
achieve better diabetes control.
System Requirement : iOS (7 or above) / Android (4.2 or above)
" appears on the display, keep pressing M for 3
" appears. Release M and then your 7-day average
BewellConnect - BW-GL1 - User Manual - 022017v1
17
Publicité
