OPSIAL 55 362 408 Guide D'utilisation page 3

KNEE PADS 55 362 408
GB
PROTECTION FOR WORK DONE ON THE KNEES: EN 14404+A1: 2010- TYPE 2 - Level 0
PERFORMANCE AND REQUIREMENTS:
PROTECTION FOR WORK DONE KNEELING ON SMOOTH FLAT FLOORS WITH NO ROUGH AREAS -
EN 14404+A1:2010 Type 2 Level 0
This protective gear is comprised with a pair of knee pads, reference no. 55 362 408, which complies
with the requirements of Standard EN14404 + A1: 2010.
Type 1 = Knee protection separate from other clothing that is tied around the leg.
Type 2 = Plastic foam or other padding to be placed in trouser leg pockets or permanently attached to
trousers.
Type 3 = Protective gear not attached to the body that is applied when the user moves around, and
which can be designed for only one knee, or both knees together.
Type 4 = Protective gear for one or both knees, forming part of devices with additional functions, such
as frames to assist in getting up, or kneelers. Knee protective gear can be worn.
The performance levels are defined according to the severity of the testing conditions.
Level 0: The knee pads are intended to be suitable for flat ground and resistance to penetration is not
required.
Level 1: The knee pads are intended to be suitable for flat ground and resistance to penetration of a
force less than (100 ± 5) N is required.
Level 2: The knee pads are intended to be suitable for harsh conditions and resistance to penetration of
a force of at least (250 ± 10) N is required.
TESTS CONDUCTED:
Test wearing the trousers + knee pads = compliant
Resistance to perforation = level 0
Peak force exerted < 3 kN on average and no individual value > 4 kN
Distribution of the force < 30 N
Dimensions of the knee pads = compliant
COMPOSITION:
Knee pads: 100% EVA (Ethylene Vinyl Acetate)
SIZE AND ADJUSTMENT:
ONE SIZE FITS ALL
Always use the knee pads in the garment designed for this purpose. Read the clothing instructions
before inserting the knee pads into the pockets.
The protection offered is optimal only when the knee pads are inserted correctly into the clothing
pockets.
This product is compliant to the essential health and
safety requirements of Regulation (EU) 2016/425.
It meets the requirements (innocuousness, comfort,
robustness and protection against the risks claimed) of
the PPE regulation 2016/425 and the PPE regulation (EU)
2016/425 as brought into UK Law and amended.
It is subject to EU examination by: IFTH (0072) –
Avenue Guy de Collongue – 69134 ECULLY - FRANCE
KNEE PADS 55 362 408
INDICATIONS FOR USE:
The position of the knees is not a natural work position. Without protection, workers may experience a
lack of comfort or immediate injury caused by hard surfaces.
Prolonged work done in this position can cause the risk of chronic illness such as prepatellar bursitis and
cartilage damage owing to continuous pressure on the knees.
Knee protection is therefore recommended for work done while kneeling.
No protective gear can offer full protection against injury or issues that are likely to occur.
To ensure compliance with Standard EN 14404+A1, OPSIAL® knee pads must be worn with pants
from the OPSIAL® ACTIV'LINE RANGE (P702639, P702640, P702LFK, P702JO8, P702KJA et P702LSZ) or
ORIGINAL BLACK DENIM (P702645).
INSTRUCTIONS FOR USE:
The kneepad must be removed from the packaging.
To insert the knee pads into the pockets specially designed for this purpose, fold them and insert them
into the trouser pockets lying flat (before putting them on) , the OPSIAL logo must be on the outside
(ground side).
CLEANING:
Cleaning of the knee pads: Clean using a damp cloth.
WARNINGS:
This protective gear is not a medical device and cannot be used for sporting activities.
In the event of wear and tear, the knee pads cannot be repaired: they need to be replaced*.
The protection offered is not suitable for harsh conditions such as work done on the knees on broken rock
in mines or quarries or when used for very long periods without frequently getting up. This protective
gear must be kept away from open flames.
* Any change in appearance requires a visual inspection of the PPE. The main signs of deterioration are discolouration,
loss of elasticity and crumbling, caused by humidity, heat and light. Knee protection showing these will be considered
ineffective and should be changed.
STORAGE:
The knee pads must be stored in the original packaging in a clean, dry, well-ventilated area and out of
direct sunlight.
Warning: any change in temperature or pressure can significantly reduce the protective performance of
the knee pads.
The knee pads, reference no. 55 362 408, are available as a pair with dimensions H 24.5cm x W 15cm -
thickness 2cm.
SAFETY:
This knee pad does not contain any substances at levels that are known or suspected to have adverse
effects on the hygiene or health of the user under the foreseeable conditions of use.
GB