Publicité
All manuals and user guides at all-guides.com
4
Operating the appliance
• In order to prevent the bright stains
that may form on the synthetic fab-
rics such as silk, iron on the reverse
side of the fabric. Do not use the
spray feature in order to prevent the
stain formation.
4.3 Steam ironing
• Set the desired steam level by
pushing the continuous steam
adjustment between the spray and
steam buttons.
• If you will make steam ironing,
make sure that the temperature
setting button (2) is within the range
marked with the steam mark. When
the thermostat light turns off, it
means that the base temperature
has reached level to generate
steam.
4.4 Dry ironing
• In order to make dry ironing, you
should bring the steam setting knob
(6) to the off position. Having water
in the iron would be advantageous;
you may use the spray button when
necessary.
Iron / User Manual
4.5 Shock steam
• During ironing, in order to remove
the tenacious creases, you can
gain strong steam by pressing on
the shock steam button (8) for 3-4
times in 5-second intervals.
• When you start to iron, shock steam
may not emit in your first couple
of presses. In order to gain shock
steam, the temperature setting but-
ton (2) should be at •• or a higher
level.
• You can open the creased parts of
the garments with the steam power
which is obtained by pressing
the shock steam button (8) dur-
ing steam ironing. However if this
process is maintained without an
interruption, water may also come
from the iron base (3) along with
the steam.
4.6 Water spray
• When you make sure that sufficient
water is available in the water
reservoir, you can use the spray (7)
feature to remove the tenacious
stains by pressing the spray button
while you are making dry or steam
ironing.
11 / 68 EN
Publicité
