All manuals and user guides at all-guides.com
the appliance involuntarily.
- Do not touch any of the appliance's moving
parts while it is operating.
Use and care:
- Do not use the appliance if its accessories are
not properly fitted.
- Do not use the appliance if the accessories
attached to it are defective. Replace them imme-
diately.
- Do not use the appliance if it is empty.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Do not force the appliance's work capacity.
- This appliance is for household use only, not
professional or industrial use.
- Store this appliance out of the reach of children
and/or those with reduced physical, sensory or
mental abilities or those unfamiliar with its use
- Make sure the ventilation grate of the appliance
is not obstructed by dust, dirt or other objects.
- Keep the appliance in good condition. Check
that the moving parts are not misaligned or
jammed and make sure there are no broken parts
or anomalies that may prevent the appliance from
operating correctly.
- To push food down the feed tube, always use
the "pusher", never use your fingers or any other
device.
- Never leave the appliance connected and
unattended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance for more than 30 minu-
tes at any one time.
- Do not use the appliance with frozen goods, ice
or those containing bones.
Service
- Make sure that the appliance is serviced only by
specialist personnel, and that only original spare
parts or accessories are used to replace existing
parts/accessories.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
Instructions for use
Before use:
- Make sure that all the product's packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
Use:
- Unroll the cable completely before plugging it in.
- Make sure the filter (C) is well placed, turning
and pressing down
- Place the protective lid (B) in the correct position
- Connect the appliance to the mains.
- Place the deposits of juice (F) and pulp (G) in
the position
- Once you have checked that the closing clamps
(E) are well fitted.
-Turn the appliance on, using the speed selector.
(I)
-NOTE: If the all the parts are not correctly as-
sembled, the appliance will not start.
- Choose desired speed: I (low speed) or II
(normal speed).
-Speed I is especially suitable for soft fruits and
vegetables such as watermelons,
grapes, tomatoes, cucumbers...
-Speed II is suitable for all other kinds of fruits
and vegetables such as apples,
carrots...
- Insert the properly-cut fruit or vegetables into the
corresponding opening in the protective lid
- Squeeze it gently with the pusher.
- The juice and the residual pulp will automatically
separate out: the juice into the glass (F) and the
residual pulp into the pulp collector (G)
- Do not exert too much pressure on the pusher
as it could affect the quality of the end result. It
could even cause the filter come to a halt.
- Do not use the appliance for more than 30 mi-
nutes at any one time. Otherwise the motor may
become damaged.
- Once finished, leave the motor to run a few
seconds so that the juice can be strained.
- Stop the appliance, selecting position 0 on the
selector control. (I)
- Before opening the blender, ensure that the
motor has stopped completely.
- Open the two closing clamps (E)
- Remove the deposits of juice (F) and pulp (G),
the pusher (A) and the protective lid.
- First pull the filter (C) and then the upper body
(D).
- Remark: If you process a large quantity of fruit,
you must periodically clean the filter and remove
the remains of the pulp.
Once you have finished using the appliance:
- Stop the appliance, selecting position 0 on the
selector control. (I)
- Unplug the appliance from the mains.
- Clean the appliance.