POLTI Vaporetto EASY Instructions page 8

TIPS FOR BETTER UNIT
PERFORMANCE
WARNINGS
• For cleaning leather, wood or delicate fabrics,
consult the surface manufacturers instructions.
Clean without accessories at a safe distance
together with a soft cloth and always do a test
on a non visible part of the item first or on a
sample. Allow the test area to dry completely
before observing results and effects on surface
or colour before proceeding to clean further
areas, making sure that exactly the same di-
stance and technique are applied as for the te-
st area.
DO NOT USE ON DRAYLON, VELVET OR
OTHER SIMILAR PILE OR DELICATE SUR-
FACES
• For cleaning wood surfaces (furniture, doors
etc.) or brickwork floors take great care as a
too long application of the steam could alter the
waxed appearance, the shine or the colour of
the surfaces cleaned. We therefore recom-
mend you to apply the steam on such surfaces
only for brief periods or to clean these surfaces
using a cloth first held in the steam.
• When cleaning glass surfaces in particularly
low temperatures preheat the glass holding the
appliance at minimum 20 In (50 cm) distance
from the surface to be cleaned.
• For the care of your plants vaporise at a mini-
mum distance of 20 In (50 cm) .
The more stubborn the dirt, the closer the steam
gun must be kept, as temperature and pressure
are greatest at the time of release. In all cases,
after steaming, rub more stubborn dirt with a dry
cloth or abrasive sponge.
Vaporetto can be used without accessories to:
• treat marks on carpets or rugs
• clean stainless steel, glass, mirrors, stratified
and enamel coverings;
• clean corners that are difficult to access, such
as stairs, window frames, door frames, alumi-
nium profiles;
• clean hob knobs and tap bases;
• clean shutters, radiators and car interiors;
• steam house plants
(from a distance);
• eliminate odours and creases from clothes.
All manuals and user guides at all-guides.com
VAPORETTO EASY
The flex is used to reach points that are difficult
to access.
• To join the flex (1) to the appliance, simply bring
the arrow on the flex into line with the single not-
ch on the appliance (fig. 4) and then rotate the
flex body in the direction of the arrow, until it
clicks into place.
• To release the flex, pull the little lever above it
and rotate in the opposite direction from before
(fig. 5).
• In turn, the lance can be connected to the flex
(2) and therefore all other accessories sup-
plied.
LANCE (2)
The lance allows you to direct the jet of steam to the
most hidden and difficult parts to reach with the
steam gun. Ideal for cleaning radiators, door and
window frames, bathroom elements and shutters. It
is an extremely important accessory.
• To attach the lance (2), simply bring the arrow on
the lance into line with the single notch on the ap-
pliance (fig.6) and then rotate the lance in the di-
rection of the arrow.
The following accessories can be attached to the
lance:
• To attach the window-washing accessory (3),
the curved nozzle (4), the brushes (5) (6), the
spatula (7) and the accessory for grouting (8),
simply insert them into the lance tip and rotate
until they lock into place. (fig.7).
(3) - Window-washing accessory: recommen-
ded for cleaning windows and mirrors.
Windows should be cleaned in 2 stages:
• Steaming the surface to be cleaned to dissolve
the dirt, using the steam request lever (B);
• Rubbing the window-washing frame over it to
eliminate the dirt, without steaming.
By covering the window-washing (3) with the
cloth (9), this accessory can be transformed into
a small brush (fig.8).
The small brush can be used for:
• furnishing fabrics (after a few tests on hidden
parts);
• velvets and leathers (from a distance and after
a few tests on hidden parts));
• car interiors, dirt-encrusted windscreen;
• small glass surfaces;
6
FLEX (1)