Publicité
Les langues disponibles
Les langues disponibles
6. REMOTE CONTROL (WI-FI)
This appliance is equipped with Wi-Fi
technology that allows you to control it
remotely via App.
MACHINE ENROLLMENT (ON APP)
l
Download the Candy simply-Fi App on
your device.
The Candy simply-Fi App is available
for devices running both Android and
iOS,
both
for
smartphones.
Get
all
the
details
functions by browsing the App in
DEMO mode.
l
Open the App, create the user profile
(or log-in if it is already created previously)
and enroll the appliance following the
instructions on the device display or the
"Quick Guide" attached on the machine.
TO ENABLE REMOTE CONTROL
l
Check that the router is switched on and
connected to the Internet.
l
Load the laundry, close the door, add the
detergent if it's necessary.
l
Turn the programme selector to the
REMOTE CONTROL (Wi-Fi) position: the
door will lock and the controls on the
control panel will be disabled.
l
Start the cycle using the Candy simply-Fi
app. When the cycle has been completed,
turn off the machine by turning the
programme selector to the OFF position to
unlock the door.
tablets
and
for
of
the
Wi-Fi
*
REMOTE CONTROL (Wi-Fi)
TO DISABLE REMOTE CONTROL
l
To exit REMOTE CONTROL mode while
a cycle is underway, turn the programme
selector to any position other than
REMOTE CONTROL (Wi-Fi). The control
panel on the appliance will be operative
once again, and if the cycle is paused,
you will be able to open the door once the
DOOR LOCKED indicator light switches
off.
For safety reasons, in some wash
cycle phases, the door can be
opened only if the level of the water
is below its lower edge and if the
temperature is less than 45°C. If
these conditions are met, wait for the
DOOR LOCKED light to switch off
before opening the door.
l
With the door closed, turn the knob to the
REMOTE CONTROL (Wi-Fi) position to
control the appliance using the app once
again. If there is a cycle underway, it will
continue.
91
Publicité
