Safety 1st Grow and Go Instructions D'installation page 7

4
• Align the rear wheel assembly hubs with the rear leg
posts on the stroller frame.
• The pin on the stroller frame will go into the slot in the
wheel assembly hubs as shown.
• Then set the stroller upright.
click!
NOTE: Pull down on the front wheels and rear
To use parking brake, see page 4.
For Car Seat Carrier Mode, see page 6.
For Stroller Seat Mode, see page 7.
For Carriage Mode, see page 8.
For Travel System Mode, see page 9.
To fold and unfold stroller, see pages 20-21.
Finished!
wheel assembly to make sure they
are attached securely.
3