Publicité
Les langues disponibles
Les langues disponibles
Do not try to repair the light yourself. Please send it in for checking, preferably with a list of
•
defects and a copy of invoice, if applicable. Also, broken LEDs can be exchanged only by the
manufacturer.
When working on the light, always pull all power plugs.
•
5.
Installation
The
light
is either mounted to a vertical glass pane with the included goose neck or
with the steel wire suspension (included in shipment)
5.1. Mounting the ceiling suspension:
The wire suspension system Qube fit provides a neat and simple method of ceiling mounting of the
Qube.
The suspension system consists of the following (1 pc. each):
1. Ceiling suspension incl. screws and plugs, app. 115 cm of stainless steel incl. stopper
2. Lamp fixing
First of all, the ceiling suspension (Fig. 2, No. 2) has to be mounted to the ceiling securely by using
screws and plugs.
Fig. 1: Qube 50 incl. connections and controllers
1. Controller for channel B
2. Controller for channel W
3. 0 - 10 V connection of control cable (inlet)
4. 0 - 10 V connection of control cable (outlet)
5. 24 V connection for transformer
6. Thread for the holder
7. Fan's grid
Now, the stainless steel wire is fed through the nut of the ceiling suspension
stopper down with a fingernail.
out of the lateral opening.
with pliers.
The black nut has to be screwed into the thread of the Qube (Fig. 1, No. 6) for fixing
the light. The steel wire can only be adjusted in length at the
stopper is pressed, the wire may slip out and the Qube falls into the aquarium. Therefore, hold the
light tight.
Pay attention to a sufficient distance to the water surface so no water or salt enters the
light!
8
All manuals and user guides at all-guides.com
The nut is screwed into the ceiling suspension
When the wire has the requested length, any surplus wire may be cut off
on the ceiling
by pressing the
and the wire comes
ceiling
suspension. Attention: If the
Publicité
