BoomToneDJ PAR IP 18 RGB 3 Mode D'emploi page 8

1- Safety Instructions
Please read the instructions carefully which includes important
information about the installation, operation and maintenance.
WARNING

Please keep this User Manual for future consultation. If you sell the fixture to
another user, be sure that they also receive this instruction booklet.

Unpack and check carefully there is no transportation damage before using the
fixture.

It's important to ground the yellow/green conductor to earth in order to avoid
electric shock.

Disconnect main power before servicing and maintenance.

Maximum ambient temperature is Ta : 40°. Don't operate it where the
temperature is higher than this.

In the event of serious operating problem, stop using the fixture immediately.
Never try to repair the fixture by yourself. Repairs carried out by unskilled
people can lead to damage or malfunction. Please contact the nearest
authorized technical assistance center. There are no user serviceable parts inside
the fixture.

Do not connect the device to any dimmer pack.

Do not look directly at the LED light beam while the fixture is on.

Do not touch any wire during operation.

The unit should be mounted via its screw holes on the bracket. Always ensure
that the unit is firmly fixed to avoid vibration and slipping while operating.
Always ensure that the structure to which you are attaching the unit is secure
and is able to support a weight of 10 times of the unit's weight. Also always use
a safety cable that can hold 12 times of the weight of the unit when installing
the fixture.

The equipment must be fixed by professionals. And it must be fixed at a place
where is out of the touch of people and has no one pass by or under it.
All manuals and user guides at all-guides.com
English
8