BoomToneDJ PAR IP 18 RGB 3 Mode D'emploi page 10

4- Menu
R000-R255
G000-G255
STAT
B000-B255
S000-S255
A00-A50
AUTO
A51-A99
SOUND SOUND
ADDR
A001-A512
A. Master/Slave built-in program function.
By linking the units in master/slave connection, the first unit will control the other units
to give an automatic, sound activated, synchronized light show. This function is good
when you want an instant show. You have to set the first unit in Automatic, sound
activated mode. Its DMX input jack will have nothing plugged into it. The other units will
have to select ADDR , Their DMX cables plugged into the DMX input jacks (daisy chain)
and the slave led lights will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1
to 512 channel so that the units can receive DMX signal.
Press the MENU ,then find Addr ,press ENTER,when the 1 is showing on the display.
Pressing ENTER . Use DOWN and UP button change the DMX512 address.
All manuals and user guides at all-guides.com
Manual adjustment of red color from dark
to bright
Manual adjustment of green color from
dark to bright
Manual adjustment of blue color from dark
to bright
Manual adjustment of strobe from slow to
quick
Full color gradual change from slow to
quick
Full color jump change from slow to quick
Sound control
DMX control mode and set address
10