2
All manuals and user guides at all-guides.com
Figure 2
Figure 3
Helpful Videos – www.hzsupport.com
3. Mount push button. Use either screws or
double sided tape to mount push button.
• Screw Mounting: To mount with screws,
remove back of case by inserting a small
screwdriver into the slot on the top or bot-
tom of the push button and twisting (see
Figure 2). Note: Remove material in screw
holes (if needed) before mounting with
screws. Attach back of case to door jamb
or wall (see Figure 3). Snap front of push
button on.
• Tape Mounting: When attaching push but-
ton using double sided tape, make sure the
surface of the door jamb or wall is clean.
Helpful Answers – 1-800-858-8501