Battery Pack - Dexter 20VRH2-17.1 Mode D'emploi

5. OPERATION
Mode selector
ROTATIONAL DIRECTION SWITCH
Actuate the rotational direction switch only when the machine is at a standstill.
The rotational direction switch is used to reverse the rotational direction of the machine. However,
this is not possible with the On/off switch actuated.
Right Rotation: For drilling and hammer drilling, push the rotational direction switch left to
the stop.
The indicator for right rotation lights up with green light when the On/off switch is actuated and
the motor is running.
Left Rotation: For loosening, press the rotational direction switch right to the stop.
The indicator for left rotation lights up with orange light when the On/off switch is actuated and
the motor is running.

BATTERY PACK

Use only original recommended lithium-ion battery pack with the voltage stated on the type plate
of your power tool. Using other batteries can lead to injuries and pose a fire hazard.
1. To insert the battery pack, slide it into the holder of until it is engaged and securely locked in
position.
Operation mode
Drilling without impact.
e.g. for drilling in wood, steel, plasterboard by
using an optional keyless / keyed drill chuck
(not provided).
Hammer drilling with impact.
Changing the chisel position.
Chiselling.
FR FR
ES ES
PT PT
IT IT
EL EL
PL PL
RU RU
UA KZ
KZ UA
RO RO
BR
BR
EN
EN
327