Playcore Swing-N-Slide PB 9242 Instructions D'assemblage page 14

Assembly Plan
Fig. 7
(3)
2-1/2''
screws
per joint
2'' screw
2-1/2'' screw
Install Deck Boards
1. Install (2) 5/4'' x 4'' support boards as shown in (Fig. 7).
2. Install (2) 5/4'' x 6'' and (1) 2'' x 2'' deck support board as shown in (Fig. 7a).
Tip: To assist with propper screw placement, mark the boards where they line up with the bracket holes, then insert harware.
3. Install remaining deck boards as shown in (Fig. 7b).
Note: Screws at center will attach to center support.
(3)
2-1/2''
screws
per joint
FLUSH
14
(2)
2-1/2''
screws
per joint
18''
(1)
2'' screw
(6) [PF 4346] 5/4'' x 6'' x 47-1/2''
Fig. 7b
(2)
2-1/2''
screws
per joint
SPACING BETWEEN BOARDS: 1/2''
Fig. 7a
FLUSH
(1)
2'' screw
FLUSH
(2)
2-1/2''
screws
per joint
(2)
2''
screws
per joint