Rimax Baby RB101 Manuel D'instructions page 31

All manuals and user guides at all-guides.com
EN
User Manual
Scanning the corresponding Parent unit:
code automatically
Flashing
Baby unit:
Flashing
Scanned the corresponding Both units:
code successfully
normal
status
Scanned the corresponding Parent unit:
still fl ashing
code unsuccessfully
Baby unit:
still fl ashing
Remarks: If operated by the supplied adaptor, please fi rst plug in the
adaptor, then power on the unit. And then scan the corresponding
code with the LINK key if need.
C. 2-Way Communication
Usually, the detected sound is transmitted from the Baby unit to
Parents unit. But Parents unit can talk to Baby unit with its TALK key.
1. Press and hold TALK key of Parents unit and talk to the Baby unit.
2. Release the TALK key, the Parents unit is in receiving status and
wait for signal from Baby unit.
Remarks: When pressing TALK key, the Parents unit does not receive
any sound from Baby unit.
31
Baby MUM RB101
constantly changing
display-readouts with a
"Di" sound