Publicité
Les langues disponibles
Les langues disponibles
HDMI (High Definition Multimedia Interface) connectors
VIDEO IN
AUDIO IN
AV1
AV1 :
L + R
VIDEO IN
AUDIO IN
AV1
AV1 :
L + R
Digital Surround receiver
conn us entry05 hdmi.eps
SPDIF
OUT
VIDEO IN
AV3
SPDIF
OUT
English_DFU_37131.indd 23
All manuals and user guides at all-guides.com
HDMI
HDMI
DVI
VIDEO IN
AUDIO IN
Connect a Digital MultiChannel Surround receiver to the
AV2
(SPDIF OUT)
HDMI is the leading new standard for Digital video and audio
interconnection. To the
connector you can connect HDMI devices
HDMI
such as a Set Top Box or compatible DVD-R or DVD player with HDMI, or
DVI-equipped devices like a computer.
So you can display high-definition pictures on this TV in the digital form.
Note: If the accessory device has DVI output only, use a DVI to HDMI adapter
cable to connect to the
connector. (Then also connect the audio cable
HDMI
to
and
jacks of
.) Go to menu => Setup => Source =>
L
R AUDIO
AV1
Analog Audio In => and select HDMI.
Connect your HDMI device with one of the
&
Select the connected digital device in the Setup, Source menu, p. 13.
é
The
connectors allow the following TV and monitor display modes:
HDMI
Standard Definition TV (SDTV)
HD
Enhanced Definition TV (EDTV)
High Definition TV (HDTV)
VGA
640x480
PC
SVGA
800x600
XGA
1280x768
Notes:
- If necessary, you can adjust the picture position to the center of the screen with
the cursor keys.
- Due to legal requirements, it is possible that with certain copy protected PCM
audio qualities from a device connected to the
signal is muted.
OUTPUT(SPDIF OUT)
- Your TV supports HDCP (High-bandwidth Digital Content Protection). This is
a system for protecting DVD content outputted via DVI from being copied. It
provides a secure digital link between a video source (DVD, PC, etc.) and your TV.
Content is encrypted at the source device to prevent unauthorized copies from
being made.
- Proper working is only guaranteed with HDMI compliant consumer products.
- Digital devices from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to display properly.
- In case no signal is detected from your HDMI device, turn off the HDMI device
and then on again.
To get an optimal viewing, it is advised to turn your DVD player to one of
the following TV display standards: 1920x1080i, 1280x720p, 720x480i or
720x480p.
connector at the bottom of the TV.
23
connectors.
HDMI
640/720 x 480i
640/720 x 480p
1920x1080i
1280x720p
60 Hz
60 Hz
60 Hz
input, the
HDMI
DIGITAL AUDIO
DIGITAL AUDIO OUT
2006-03-29 6:31:03 PM
Publicité
